WARNING
• Always turn and check that it is safe to park your car before backing up. Always back up slowly.
• Use the displayed lines as a reference.
The lines are highly affected by the number of occupants, fuel level, vehicle position, road condition and road grade.
• If the tires are replaced with different sized tires, the predicted course line may not be displayed correctly.
• On a snow-covered or slippery road, there may be a difference between the predicted course line and the actual course line.
• If the battery is disconnected or becomes discharged, the predicted course lines may not be displayed correctly. If this occurs, drive the vehicle on a straight road for more than 5 minutes.
• The displayed lines will appear slightly off to the right because the rearview camera is not installed in the rear center of the vehicle.
• The distance guide line and the vehicle width guide line should be used as a reference only when the vehicle is on a level paved surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and displayed objects.
• When backing up the vehicle up a hill, objects viewed in the monitor are further than they appear. When backing up the vehicle down a hill, objects viewed in the monitor are closer than they appear. Use the inside mirror or glance over your shoulder to properly judge distances to other objects.

The vehicle width and predicted course lines are wider than the actual width and course.

1. Visually check that the parking space is safe before parking your vehicle.

2. The rearview of the vehicle is displayed on the screen A as illustrated when the selector/shift lever is moved to the “R” (Reverse) position.

3. Slowly back up the vehicle adjusting the steering wheel so that the predicted course lines B enter the parking space C .

4. Maneuver the steering wheel to make the vehicle width guide lines D parallel to the parking space C while referring to the predicted course lines.

5. When the vehicle is parked in the space completely, move the selector/shift lever to the P (Park) position (Automatic Transmission models) or in an appropriate gear (Manual Transmission models) and apply the parking brake.