Confirming memory storage
• Push the ignition switch to the ON position and push the SET switch. If the main memory has not been stored, the indicator light will come on for approximately 0.5 second. When the memory has stored in position, the indicator light will stay on for approximately 5 seconds.
• If the battery cable is disconnected, or if the fuse opens, the memory will be canceled. In this case, reset the desired position using the previous procedure.
• If optional Intelligent Keys are added to your vehicle, the memory storage procedure to switch 1 or 2 and linking Intelligent Key procedure to a stored memory position should be performed again for each Intelligent Key. For additional Intelligent Key information, see “Keys”.
See also:
Operating conventional (fixed speed) cruise control mode
Operating conventional (fixed speed) cruise control mode
To turn on the conventional (fixed speed) cruise control mode, push and hold the MAIN switch
A for longer than about 1.5 seconds.
When pu ...
Supplemental air bag warning light
The supplemental air bag warning light,
displaying in the instrument
panel,
monitors the circuits of the supplemental
front-impact air bag, front seat-mounted
side-impact supplemental air b ...
Overtaking other vehicles
The Blind spot warning indicator light illuminates if you overtake a vehicle and that vehicle stays in the detection zone for approximately 3 seconds.
The radar sensors may not detect slower movi ...