Setting hazard indicator and horn mode

Setting hazard indicator and horn mode - How to use remote keyless entry system - Remote keyless entry system - Pre-driving checks and adjustments - Infiniti G Owners Manual - Infiniti G

This vehicle is set in hazard indicator and horn mode when you first receive the vehicle.

In hazard indicator and horn mode, when the LOCK button 2 is pushed, the hazard indicator flashes once. button 1 is pushed, the hazard indicator flashes twice and the horn chirps once. When the UNLOCK If horns are not necessary, the system can be switched to the hazard indicator mode. button 2 is pushed, the hazard indicator flashes once.

If horns are not necessary, the system can be switched to the hazard indicator mode.

In hazard indicator mode, when the LOCK button is pushed, neither the hazard indicator nor the horn operates. button is pushed, the hazard indicator flashes twice. When the UNLOCK Hazard indicator and horn mode: button is pushed, neither the hazard indicator nor the horn operates.

Hazard indicator and horn mode:

Hazard indicator mode:

Hazard indicator mode:

Switching procedure:

Switching procedure:

To switch the hazard indicator and horn (chime) operation, push the LOCK 2 buttons on the 1 and UNLOCK2 buttons on the  2 buttons on the Intelligent Key simultaneously for more than 2 seconds.

• When the hazard indicator mode is set, the hazard indicator flashes 3 times.

• When the hazard indicator and horn mode is set, the hazard indicator flashes once and the horn chirps once.

Hood

    See also:

    How to use the INFO button
    Press the INFO button. The display screen shows vehicle information for your convenience. The information shown on the screen should be a guide to determine the condition of the vehicle. See t ...

    Three-point type seat belt
    WARNING • Every person who drives or rides in this vehicle should use a seat belt at all times.• Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous.The shoulder belt ...

    Moisture
    Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle, and should be removed for drying to avoid f ...