Unlocking doors and fuel-filler door

Unlocking doors and fuel-filler door - How to use remote keyless entry system - Remote keyless entry system - Pre-driving checks and adjustments - Infiniti G Owners Manual - Infiniti G

1. Push the UNLOCK the Intelligent Key once. button 2 on the Intelligent Key once.

2. The hazard indicator flashes once. The driver’s door and fuel-filler door will unlock.

3. Push the UNLOCK 4. The hazard indicator flashes once again. All the doors will unlock. button on the Intelligent Key again within 1 minute.

4. The hazard indicator flashes once again. All the doors will unlock.

All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the UNLOCK Intelligent Key while the doors are locked. If during this 1-minute time period, the UNLOCK button on the Intelligent Key while the doors are locked. If during this 1-minute time period, the UNLOCK • Opening any door• Pushing the ignition switch• Inserting the Intelligent Key into the Intelligent Key port. button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute.

• Opening any door
• Pushing the ignition switch
• Inserting the Intelligent Key into the Intelligent Key port.

During this 1-minute time period, if the UNLOCK Key is pushed, all doors will be locked automatically after another 1 minute. button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute.

    See also:

    Vanity mirrors
    To access the vanity mirror, pull the sun visor down and flip open the mirror cover. The vanity mirror will illuminate when the mirror cover is open. ...

    Welcome light
    To activate or deactivate the welcome light function, perform the following procedure. 1. Push the ignition switch to the ON position. 2. Open the driver’s side door. 3. Within 20 seconds ...

    Passenger compartment
    CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not ...