Rear seats
Folding (Coupe only)
WARNING
• Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could result in serious injury in an accident or sudden stop.
• Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury.
• When returning the seatbacks to the upright position, be certain they are completely secured in the latched position.
If they are not completely secured, passengers may be injured in an accident or sudden stop.
• Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured.
Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children’s access to car keys.
The rear seatback can be folded according to the following procedure.
To fold from the trunk:
1. Open the trunk lid.
2. Pull the handle 1 located on the left side of the trunk. The rear seatback will be unlatched.
3. Fold the rear seatback down 2 .
To fold from the rear seat:
1. Pull the strap 1 located at the center bottom of the seatback sideways. The rear seatback will be unlatched.
2. Fold the rear seatback down 2 .
To return the seatback:
1. Fold up the rear seatback.
2. Securely lock the seatback in position.
See also:
Checking engine coolant level
Checking engine coolant level
Check the coolant level in the reservoir when the engine is cold. If the coolant level is below MIN
2 , open the reservoir tank cap and add coolant up to the MAX 1 l ...
Oil additives
INFINITI does not recommend the use of oil additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed.
Oil which may contain foreig ...
Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ...