INFINITI Voice Recognition Alternate Command Mode
The following section is applicable when
Alternate Command Mode is activated.
When Alternate Command Mode is activated,
an expanded list of commands can
be used after pushing the TALK
switch.
In this mode, available commands are not
fully shown on the display or prompted.
Review the expanded command list when
this mode is active. See examples of
Alternate Command Mode screens.
Please note that in this mode the recognition
success rate may be affected as the
number of available commands and ways
of speaking each command are increased.
To improve the recognition success rate,
try using the Speaker Adaptation Function
available in that mode. (See “Speaker
adaptation function (for Alternate Command
Mode)” later in this section.) Otherwise
it is recommended that Alternate
Command Mode be turned OFF and Standard
Mode be used for the best recognition
performance.
Activating Alternate Command Mode
When the Standard Mode is active, perform the following steps to switch to the Alternate Command Mode. 1. Push the SETTING button on the instrument panel. 2. Highlight the “Others” key. 3. Highlight the “Voice Recognition” key.
4. Highlight the “Alternate Command Mode” key. 5. The confirmation message is displayed on the screen. Push the “OK” key to activate the Alternate Command Mode.
Displaying command list
If you are controlling the system by voice commands for the first time or do not know the appropriate voice command, perform the following procedure for displaying the voice command list (available only in Alternate Command Mode).
1. Push the INFO button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. 4. Select the “Command List” key.
5. Select a category from the list.
6. Select an item. 7. If necessary, scroll the screen using the INFINITI controller to view the entire list. 8. Push the BACK button to return to the previous screen.
Command list
Displaying user guide
You can confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands. 1. Push the INFO button on the instrument panel. 2. Select the “Others” key using the INFINITI controller and push the ENTER button. 3. Highlight the “Voice Recognition” key using the INFINITI controller and push the ENTER button. 4. Highlight the “User Guide” key using the INFINITI controller and push the ENTER button. 5. Highlight an item using the INFINITI controller and push the ENTER button.
Available items:
► Getting Started
Describe the basics of how to operate the INFINITI Voice Recognition system.
► Let’s Practice
Mode that allows practicing by following the instructions of the system voice.
► Using the Address Book
Refer to Navigation System Owner’s Manual.
► Finding a Street Address (if so equipped)
Refer to Navigation System Owner’s Manual.
► Placing Calls
Tutorial for making a phone call by voice command operation.
► Help on Speaking
Displays useful tips for how to correctly speak commands in order for them to be properly recognized by the system.
► Voice Recognition Settings
Describes the available voice recognition settings.
► Adapting the System to Your Voice
Tutorial adapting the system to your voice.
See also:
Repair and replacement procedure
The front air bags, side air bags, curtain and rollover air bags and pretensioners are designed to inflate on a one-time-only basis. As a reminder, unless it is damaged, the supplemental air bag warni ...
Checking bulbs
With all doors closed, apply the parking brake and push the ignition switch to the ON position without starting the engine.
The following lights will come on (if so equipped):
The following lights ...
USB memory operation
Audio main operation
Open the tray lid and connect a USB
memory 1 as illustrated. Then, push the
DISC·AUX button repeatedly to switch to
the USB memory mode.
If the system has been turned o ...