Audible reminders

Audible reminders  - Warning/indicator lights and audible reminders - Instruments and controls - Infiniti QX Owners Manual - Infiniti QX

Key reminder chime

A chime will sound if the driver side door is opened while the ignition switch is pushed to the ACC position. Make sure the ignition switch is pushed to the OFF position, and take the Intelligent Key with you when leaving the vehicle.

Light reminder chime

A chime will sound when the driver side door is opened with the light switch in the in the ACC, OFF or LOCK position. position and the ignition switch in the ACC, OFF or LOCK position. Turn the light switch off when you leave the vehicle. The chime will also sound for 2 seconds when the ignition switch is turned to the OFF position with the fog lights on while the headlight switch is in the AUTO position.

Parking brake reminder chime The chime will sound if the vehicle is driven at more than 4 MPH (7 km/h) with the parking brake applied. Stop the vehicle and release the parking brake.

Brake pad wear warning

The disc brake pads have audible wear warnings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion. This scraping sound will first occur only when the brake pedal is depressed. After more wear of the brake pad, the sound will always be heard even if the brake pedal is not depressed. Have the brakes checked as soon as possible if the warning sound is heard.

    See also:

    Blind Spot Warning (BSW) system/Blind Spot InterventionTM system (if so equipped)
    The Blind Spot Warning (BSW) and Blind Spot InterventionTM systems can help alert the driver of other vehicles in adjacent lanes when changing lanes. The BSW system uses radar sensors 1 ins ...

    Air cleaner
    NOTE: The air cleaner filter should not be cleaned and reused. Replace the air cleaner filter according to the maintenance log shown in the “Warranty Information and Maintenance Booklet.” To rem ...

    Clearing the programmed information
    Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds). ...