2nd row seats
WARNING
► Never allow anyone to ride in the cargo
area or on the rear seat when it is in the
fold-down position. Use of these areas
by passengers without proper restraints
could result in serious injury in an
accident or sudden stop.
► When returning the seatbacks to the
upright position, be certain they are
completely secured in the latched position.
If they are not completely secured,
passengers may be injured in an accident
or sudden stop.
► Properly secure all cargo to help prevent
it from sliding or shifting. Do not place
cargo higher than the seatbacks. In a
sudden stop or collision, unsecured
cargo could cause personal injury.
Reclining
Pull the reclining leverA and position the seatback at the desired angle. Release the reclining lever after positioning the seat at the desired angle. To return the seatback, pull the lever. The reclining feature allows adjustment of the seatback for occupants of different sizes to help obtain proper seat belt fit. (See “Precautions on seat belt usage” later in this section.) The seatback may also be reclined to allow occupants to rest when the vehicle is parked.
WARNING
► Do not ride in a moving vehicle when the
seatback is reclined. This can be dangerous.
The shoulder belt will not be
against your body. In an accident, you
could be thrown into it and receive neck
or other serious injuries. You could also
slide under the lap belt and receive
serious internal injuries.
► For the most effective protection when
the vehicle is in motion, the seat should
be upright. Always sit well back in the
seat with both feet on the floor and
adjust the seat belt properly. See “Precautions
on seat belt usage” later in this
section.
► After adjustment, check to be sure the
seat is securely locked.
Entry to 3rd row seat
CAUTION
► Do not drive with the 2nd row seat
tipped up.
► Be careful not to allow the 2nd row seat
to pinch, hit any part of your body or
other people when operating the 2nd
row seat. Make sure the seat path is
clear of all objects before moving the
seat.
The 2nd row seat can be tipped forward for easy entry to or exit from the 3rd row seat.
For manual type:
To enter the 3rd row seat, pull the leverA orB located on the 2nd row seat and fold the seatback forward 1 at an angle over the seat base. Then lift up the seat base and tip the 2nd row seat forward 2 . This will release the back of the seat so it may be tipped forward. To exit the 3rd row seat, pull the lever A or B and fold the seatback forward onto the seat base. Then lift up on the seat base and tip it forward.
For remote release type (if so equipped): Push and hold the switch located on the instrument panel. The seatback will fold down and tip forward. The lower corner of the seat base will lift and the 2nd row seat will tip forward.
See also:
Seatback pockets
SEATBACK POCKETS
There are two seatback pockets located on the back of the driver and passenger seats. The pockets can be used to store maps. ...
General maintenance
During the normal day-to-day operation of
the vehicle, general maintenance should
be performed regularly as prescribed in
this section. If you detect any unusual
sounds, vibrations or smell, b ...
Checking engine oil level
Checking engine oil level
1. Park the vehicle on a level surface and apply the parking brake.
2. Run the engine until it reaches operating temperature.
3. Turn off the engine. Wait more than 15 m ...