Releasing the rear liftgate
The rear liftgate can be opened and closed by performing the following:
● Press the
button for longer
than 0.5 seconds to open the rear liftgate.
● Press the 
button again for longer
than 0.5 seconds to close the rear liftgate.
When the 
button is pressed during
the open or close process the liftgate will reverse.
See also:
Clearing the programmed information
Individual buttons cannot be cleared,
however to clear all programming, push
and hold the two outside buttons and
release when the indicator light begins to
flash (in approximately 20 seconds) ...
Floor mats
WARNING
To avoid potential pedal interference that may result in a collision or injury:
● NEVER place a floor mat on top of another floor mat in the driver front position.
● Use o ...
Precautions on vehicle-to-vehicle distance control mode
The system is intended to enhance the
operation of the vehicle when following a
vehicle traveling in the same lane and
direction.
If the distance sensor A detects a slower
moving vehicle a ...