Conventional (fixed speed) cruise control switch
Conventional (fixed speed) cruise control switch
1. ACCELERATE/RESUME switch: Resumes set speed or increases speed incrementally.
2. COAST/SET switch: Sets the desired cruise speed, reduces speed incrementally.
3. CANCEL switch: Deactivates the system without erasing the set speed.
4. MAIN switch: Master switch to activate the system.
See also:
Replacing
Replace the wiper blades if they are worn.
1. Pull the wiper arm.
2. Push the release tab A , and then
move the wiper blade down the wiper
arm 1 while pushing the release tab
to remove.
...
Troubleshooting guide
The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions.
Where the solutions are listed by number, try each solution i ...
Push starting
Do not attempt to start the engine by
pushing.
CAUTION
► Automatic transmission models cannot
be push-started or tow-started. Attempting
to do so may cause transmission
damage.
...