Shift lock release
Shift lock release
If the battery charge is low or discharged, the selector lever may not be moved from the P (Park) position even with the brake pedal depressed and the selector lever button pushed.
To move the selector lever, perform the following procedure: 1. Push the ignition switch to the OFF or LOCK position.
2. Apply the parking brake.
3. Remove the shift lock cover A using a suitable tool.
4. Push down the shift lock B as illustrated.
5. Push the selector lever button C and move the selector lever to N (Neutral) position D while holding down the shift lock.
Now the vehicle may be moved to the desired location.
If the lever cannot be moved out of P (Park), have an INFINITI retailer check the automatic transmission system as soon as possible.
See also:
Preview function (for Intelligent Cruise Control system equipped models)
The ICC system with the preview function identifies the need to apply emergency braking by sensing the vehicle ahead in the same lane and the distance to the vehicle ahead and relative speed from it, ...
Rain-sensing auto wiper system
The rain-sensing auto wiper system can
automatically turn on the wipers and
adjust the wiper speed depending on the
rainfall and the vehicle speed by using the
rain sensor located on the upp ...
Releasing inside the trunk
To open the trunk lid from the inside, pull the release handle 1 until the lock releases and push up on the trunk lid.
The release lever is made of a material that glows in the dark after a brief exp ...