Minimize voice feedback (for Alternate Command Mode)

To minimize the voice feedback from the system, perform the following steps.
1. Push the SETTING button on the instrument panel.
2. Select the “Others” key.
3. Select the “Voice Recognition” key.
4. Select the “Minimize Voice Feedback” key.
5. The setting is turned to ON and the voice guidance will now be reduced when using the Voice Recognition system.
See also:
Engine oil and filter
Two-wheel drive (2WD) models (VQ25HR/VQ37VHR engine)
1. Place a large drain pan under the drain plug.
2. Remove the oil filler cap.
3. Remove the drain plug 1 with a wrench and completely drain t ...
Readiness for Inspection/Maintenance (I/M) test (US only)
A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing), or similar equipment. Make sure ...
Tow mode
The TOW MODE should be used when
pulling a heavy trailer or hauling a heavy
load. Driving the vehicle in the TOW MODE
with no trailer/load or light trailer/light
load will not cause any dama ...
